The MFE-TEMP-S3-50 provides a rugged temperature sensor. The sensor is equipped with a
DS18B20 1-Wire temperature sensor embedded into the probe. The MFE-TEMP-S3-50 is directly compatible with all general purpose 1-Wire host adapters. For complete documentation on the embedded
DS18B20 sensor, please refer to the manufacturer's spec sheet.
The full temperature range is supported (55 - 125°C) by both the silicone cable and the probe.
Features
- Very rugged construction
- Full temperature range of the DS18B20 is supported
- Low cost
- Based on the DS18B20 1-Wire temperature sensor
- High accuracy and resolution
- Uses 1-Wire communication protocol
- Compatible with most 1-Wire software
- Made in Germany
Pinouts
| Green | 1-Wire data |
| White | 1-Wire return |
| Brown | Ext. Power (Vdd) |
Pinouts (Rev. 1)
| Blue | 1-Wire data |
| White | 1-Wire return |
| Black | Ext. Power (Vdd) |
Parasitic Mode
For parasitic mode, the Vdd line must be tied to ground. External power is recommended for faster operation.
Examples of Accessories
